COBHAM SOLO4 Spezifikationen Seite 44
- Seite / 99
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
44
Bandwidth Mode
The Bandwidth Mode switches the unit between either domo
Narrowband (2.5MHz or 1.25MHz channel bandwidths) or DVB-T 8MHz
bandwidth. To select 6MHz and 7MHx DVB-T modes the user must first
click on ‘Advanced’ to enter the Advanced setting page.
Audio
Turns ‘On’ or ‘Off’ a basic audio setting – the audio settings are
optimised considering the bit-rate of the selected Transmit mode. The
user can set there own
audio settings using the ‘Advanced’ page, if
required.
Default Transmit Mode
In Narrowband the user has the following pre-defined modes available
from the main window. Note that the Ultra Long Range Mode is only
available to users who have purchased the SOLO4TXUP option
(1.25MHz and MPEG-4 modes). The user can of course define their
own specific FEC, bandwidth and modulation requirements from the
‘Advanced’ page.
Ultra Long R
ange: 1.25MHz QPSK FEC 1/3 (optional)
Long Range: 2.5MHz QPSK FEC 1/3
Medium Range: 2.5MHz QPSK FEC 2/3
Short Range: 2.5MHz 16QAM FEC 2/3
In DVB-T the available modes are
QPSK _ FEC 8MHz 1/32 Guard Interval
QPSK _ FEC 8MHz 1/32 Guard Interval
16QAM _ FEC 8MHz 1/32 Guard Interval
Scrambling
If the AES scrambling option has been purchased for the SOLO2 or
SOLO4 system in use, then it is possible to encrypt the link.
Scrambling
must be enabled at the transmitter by selecting either AES128 or AES
256 in the scrambling field. The actual scrambling key can then be
entered by clicking on the yellow ‘key’ icon.
File Options
Load Config – used for loading a single configuration data from text file.
Save Config - used for saving configuration data to text file.
Load Config Set – used for loading all 8 configurations from a text file
Sa
ve Config Set - used for saving all 8 configurations to a text file
- SOLO2 and SOLO4 1
- Users’ Manual 1
- 1 Table of Contents 2
- 2 Change History 4
- • Advanced operation 5
- • Technical reference 5
- 4 Introduction 6
- 5 Warranty and Support 7
- 5.1 Warranty Cover 7
- 6.3 CE marking 8
- S-Band 10
- Made in the UK 10
- Controls 12
- Cables and Connections 15
- • Control 3m 16
- • DC Power 2m 16
- DC Power 17
- Video and Audio 17
- Antennas 18
- • Vehicle based applications 19
- Connections 22
- Square down-converter 24
- Video Output Connection 28
- • Current Draw – 0.9A at 12V 29
- • Current Draw – 1.0A at 12V 29
- Control Cable 30
- Data Connection 30
- Installation Notes 30
- 7.4 Powering on the System 31
- Diagnostic On Screen Display 32
- Using the SOLBAT 34
- Charging the SOLBAT 34
- Amplifier Connection 35
- DC Power and Control Cable 36
- • Vehicle applications 37
- • Aircraft applications 37
- • Long Range fixed links 37
- RF Connection 38
- 8 Advanced Operation 41
- Output Frequency (MHz) 43
- Bandwidth Mode 44
- Default Transmit Mode 44
- Scrambling 44
- File Options 44
- Advanced TX Controller Window 45
- Modulation Bandwidth 45
- Modulation Output 45
- Narrow Band FEC 46
- Narrow Band Guard Interval 46
- Narrow Band Modulation 46
- DVB-T Service Name 46
- DVB-T FEC 46
- Video Bitrate 48
- Horizontal resolution 48
- Audio Encoder 48
- Audio Input Level 48
- Unit Name 48
- Input Frequency (MHz) 52
- Service Name 52
- Descrambling 52
- Advanced RX Controller Window 53
- Narrowband / DVB-T 53
- Input Frequency 53
- FPGA Version (Status Only) 57
- Chaining 57
- 9 NETSTREAM IP Output Option 59
- 9.1 General Info 59
- 9.2 Streamer 59
- 9.3 Web Server 59
- 10 Software Decoder 62
- 10.1 General Information 62
- 10.3 Encrypted Streams 65
- 10.4 Main Decoder Window 67
- Enable audio 68
- Close window 68
- 11 Fault Finding 71
- 11.1 Indicated Faults 71
- 11.2 Fault Symptoms 72
- 12 LED Indicators 73
- 13.1 Input Status Page 74
- 13.2 RF Advanced Page 75
- 13.3 Engineering Data Page 76
- 13.4 GPS Overlay 76
- 13.5 Frequency Scan Page 77
- Quick Scanning Stage 78
- Service Scanning Stage 78
- Completed Scan 79
- Front Panel Control 80
- Control Commands 81
- Original OSD Mode 82
- OSD Timeout 83
- 15 Control Protocols 86
- 15.5 Receiver Command List 94
- 16 Default Configurations 98
Verwandte Produkte und Handbücher für Empfänger COBHAM SOLO4
Empfänger COBHAM NanoVue Bedienungsanleitung
(51 Seiten)
(51 Seiten)
Empfänger COBHAM Messenger VETA Handbuch
(31 Seiten)
(31 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.084 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern